Home > Black Screen > Black Screen- Nothing On The Monitor.help!

Black Screen- Nothing On The Monitor.help!

You should have already checked the RAM using the article I mentioned above, but you should also make sure the fan on the video card is running. I have tried connecting a monitor with the blue VGA wire thinking it might have re set itself but nothing. Install Recovery console so that it may be used when computer crashes! If you end up connecting your monitor the motherboard, it might work for a little bit, but suddenly go blank. http://magicnewspaper.com/black-screen/black-monitor-after-xp-splash-screen.html

It was working fine a couple of weeks ago, but then I turned on & it was not working anymore. If again when you open the power of your pc and still the same, you can try to change your video card or again if nothing happens then you should buy If none of the above works, its time to see professional help! I removed my HD 3450 512MB graphics card & plugged monitor in Built-In Monitor port & Vica versa (In Graphics Card), but no use. 4). Source

Important: If your computer is in fact showing information on the monitor, but is still not booting fully, see How to Fix a Computer That Won't Turn On for a better Just reconnect one by one, following with a startup. Similar Threads - Black Screen nothing Laptop boots but nothing but black screen fireflamemm, Jun 12, 2016, in forum: Hardware Replies: 6 Views: 263 flavallee Jun 12, 2016 HP Desktop Stuck if it gives +0.4v or -0.4v variation from actuat means, showing 11.6 or 12.4 instead of 12v , so on.

If the input voltage for the power supply is not correct (based on your country) then your computer may not turn on completely.There's a good possibility that your PC wouldn't power Try reseating all of your ram modules. Please tell me, How to Clear CMOS? What should I do?

The battery is ok, the capacitors seem to be ok too. Same problem. External monitor As is so often the case, diagnosing and repairing hardware is much easier when all of the parts aren't enclosed in the same, tiny box. Any idea how to fix this issue or what is wrong with my computer?Thanks.

Use the following steps to check for loose components: Check for loose internal components WARNING: The edges of metal panels can cut skin. If the cables are connected and you only have one video connection, then you need to rule out bad cables. Turn on the air-conditioning and install an additional fan in the room if possible c. Shut down your computer and monitor.

  1. If it is, try another outlet.
  2. Register now Not a member yet?
  3. Resetting your PC will preserve all your programs and data, but reinstall the Windows system files.
  4. was working fine...
  5. In order to perform these steps, you must connect the computer to another working monitor.
  6. Replace your monitor if it's defective or continue to Step 4 if you still have problems.
  7. NOTE: If you cannot select your monitor's native display resolution, then update the computer's video drivers and repeat this step.
  8. Reply to GRiMM R3AP3R VimbaiNov 12, 2015, 10:16 AM bruce20 said: rdc85 said: If trying onboard display (connecting the monitor to the mobo back panel) still not having any display could
  9. All rights reserved.

Any idea how to fix this issue or what is wrong with my computer?Thanks. http://www.computerhope.com/issues/ch000241.htm What happens? In addition to this solution being applied too few times to be reliable, albeit successful each time, I also realise that it's heath robinson at best and at worst stops the Helpful +10 Report smitp004 Mar 13, 2009 at 04:54 AM it can sometimes mean the graphics card has fried, my computer did it, grahpics card didnt help, neither did it when

Computer monitor help and support. http://magicnewspaper.com/black-screen/occassionally-monitor-screen-stays-black-on-boot-up.html Also, Windows normally detects the highest resolution your monitor can support and shows only those options. It will work. Make a boot disk (see http://support.microsoft.com/kb/314503 for instructions for XP) d.

After I got it working with only 1 ram installed, I plugged in the other and it was still working. thanks Report yousufmedia 2Posts Thursday October 15, 2009Registration date October 16, 2009 Last seen - Oct 16, 2009 at 09:27 AM please solve my problem all right but my computer not I have tried everything I can without having any spare parts to try and compare with, I am now officially lost.I hope you get somewhere with yours mate.Cheers. http://magicnewspaper.com/black-screen/monitor-screen-goes-black-after-startup.html If you are a bit technically savvy, you can try to open up your computer and check to make sure everything is connected or seated properly.

Rebooted. This will only happen if the CD is set to Auto Run. Turned On, but same issue. 2).

Check your manual to see what key combination you need.

This isn't a step to skip if, after all the steps above, your computer is still not turning on completely. Reinstall each piece of hardware that you removed in Step 10, one we have same problem Reply to jaymar_1 Evika_Jan 30, 2016, 6:46 PM Having the same problem right now with my second PC, Also I noticed that dvd/cd mechanics are somehow "stuck" DONT HESITATE. That box RootbeaR, Apr 13, 2007 #9 Sponsor This thread has been Locked and is not open to further replies.

With the power cable removed press the Power button on the front of the computer for 5 seconds. You don't see the Windows logo. I removed all the hardware, except processor & power supply. navigate to these guys If this doesn't work, go to Step 6. 6.

then left off for few months now nothing on screen... Figure 3: Troubleshoot screen Click Startup Settings. If the power is on and everything looks fine, but you're still not getting anything on your display, the computer may have gone into standby or sleep mode and isn't being OK.

I was burning a CD and it froze, so I hit the restart button and from that last action, my computer stopped coming up... Do the following: Replace the monitor power cable. Any idea how to fix this issue or what is wrong with my computer?Thanks. Try powering down the computer by pressing and holding the power button until the computer turns off.

A POST card is inexpensive and is a more reasonable approach than stocking spare computer parts. Finally, if all else fails, you'll probably need to seek professional help from a computer repair If you're not already familiar with forums, watch our Welcome Guide to get started. Here's How to Tell Up Next Article Here's What to Do When Your Computer Freezes During Windows Startup Up Next Article How to Fix a Blue Screen of Death Up Next I did some research on Google about this issue & did a few things. 1).

its weak. I removed my HD 3450 512MB graphics card & plugged monitor in Built-In Monitor port & Vica versa (In Graphics Card), but no use. 4). When this happens, the computer might make a beeping sound when turned on. Helpful +17 Report jeny Jun 25, 2010 at 04:36 PM i think its the graphics card Helpful +16 Report Renagde Crab Sep 7, 2009 at 12:29 PM Hi guys, I have

I'll mention the easier fixes first because the worst case scenario is having to get a piece of hardware replaced on your computer. In older computers, the fans were very powerful (remember the loud computers of yesteryears?). remove the memory card and power on 5. Is there any solution for it???