Home > Computer Freezes > Computer Freezes On Boot Due To Secondary Slave HD

Computer Freezes On Boot Due To Secondary Slave HD

Or you could just get that PSU from the store and see if it fixes your problem. ASUS suggested: Update drive firmware (no updates available); Try a larger power supply (already have 650W) and finally; Our motherboard must be defective return it to CompUSA for a replacement The second, however, from 2000, started making squealing sounds and frequent hollow-sounding quite high-pitched clicks. Now type "bootsect /nt60 /all /force" and press Enter. http://magicnewspaper.com/computer-freezes/help-computer-freezes-right-after-boot-up.html

Here is my problem, the drive rails that came with my case do not fit on the hard drive. I installed Windows on the SATA drive.I built this computer myself and haven't had any problems with this configuration. I also tried reseating all the data cables and adapter cards, which didn't work. Once reported, our moderators will be notified and the post will be reviewed. https://forums.techguy.org/threads/computer-freezes-on-boot-due-to-secondary-slave-hd.376062/

More resources See also my computer was fine then one day it said keyboard falure error auto sensing secondary master hard disk drive and it says to p solved Computer doesn't Other benefits of registering an account are subscribing to topics and forums, creating a blog, and having no ads shown anywhere on the site. Register a free account to unlock additional features at BleepingComputer.com Welcome to BleepingComputer, a free community where people like yourself come together to discuss and learn how to use their computers. I had an error such as :" reboot and select proper boot device or insert boot media in selected boot device and press a key" I checked bios and had to

in any case, the motherboard should be replaced for the aforementioned reasons. PLEASE HLPE Reply Michael on October 24, 2009 at 7:02 pm GREAT THANKS!!!!!!! Some BIOSes allow you to specify a drive by its position in the hard-drive list as below (eg HDD-1, HDD-2, etc.): Some BIOSes let you specify a specific drive by its Its only 181 megs out of 1.3TB, but just wanted to know if that is...

I do not know what setup exactly do you have inside that case, so this is just assumption.If you can, try another HDD and see if it still happens. ScribelsAug 1, 2011, 3:42 AM house70 said: If you can reproduce those findings every time, we have it nailed down. Oh yes and too many fans trust me about the power supply problems I'm removing some fans so I hope that I don't have to replace my power supply, mixing sata http://www.sevenforums.com/hardware-devices/200883-secondary-hard-drive-freezes-system-before-windows-launch.html I have everything for my sons computer, It has a INTEL P4 MOTHERBOARD & CELERON D 2.26GHz CPU FAN COMBO and here are the specs: CPU: Socket 478 support Intel Pentium

no Tonelli or Fubini Why didn't Frodo take a map with him? and ur write he DIDNT start off with TAKE drive out of box… jeeees…. At this point you're ready to close the command shell and restart your computer to Windows. Reply Douglas on September 26, 2009 at 3:28 pm Oh My God!

For SATA drives, your life, again, got easier. Take it to your local electronics shop and they'll give you a replacement (Radio Shack, Best Buy, etc….). All Rights Reserved. Storing data on it and such.

I have to start at "start windows normally" and then tries to boot further but then blue screens and says disc drive is not configured properly. Is there any way I can change how my harddrives show up as Master/Slave in my BIOS as I can not change this, may be that is the problem.The harddrives are Apparently, the driver for the WD20EARX was still active on the system so no new install was necessary. On a SATA hard drive, position of the drives on the cable does not matter at all because a SATA cable only accomodates one drive.Plug the system in and turn it

Drive F: still appears on my Computer and I can now access Shared Files between both computers which I couldn't do after installing MaxBlast5. Ok this post is getting a bit long now, please I desperately need advise. Some SATA drives do have a jumper which controls the speed of the SATA drive itself, but you do not need to worry about anything related to master, slave or cable I put my laptop hard drive Seagate ST950042 0AS 500 gb (it stopped working) into external enclouser and plug into my other laptop throughr USB.

Whether this is valid or not, the solution worked for me. I had to rename my drives to a drive letter beyond the H drive. Replug the power cord.

Reply LUIS RESTO on June 24, 2009 at 11:06 pm DAVID YOU ARE THE BEST BROI want say Thanks so much for this postthis post help me alotthanks again DAVID RISLEY

July 4, 2012 ron i have external 1tb wd5000aav external usb. Even for a non-too compuer literate such as myself!Cheers! Okay, that was a while back. Of course, that still leaves the plug on the HDD itself exposed to repeated stress, but this would be only for testing purposes.

This is particularly noticeable when you plug a bad removable drive in while running an OS; the system becomes unresponsive, even to the point of the mouse cursor freezing until the Works way better, but I think this proves that there is definitely a power failure.Here is the statistics on the Power Supply that I read on the sticker:Bestec Model ATX 300-12 As it is full of data and pictures I do not want to reformat it. My System Specs Computer type PC/Desktop System Manufacturer/Model Number Custom-built OS Windows 7 Professional SP1 32-bit CPU Intel Core 2 Duo E6600 2.4GHz Motherboard Asus PL5D2 Memory 4GB DDR2-667 (4x1GB in

Reply David D on June 3, 2008 at 12:56 pm I'm planning a hard drive replacement. Are you looking for the solution to your computer problem? One is a OCZ Agility 4 128GB SSD (OS) and the other one is a Western Digital Black Caviar 1TB HDD(all other documents and stuff). Did you ever find out what your possible problems could be?

I did have just a couple of questions. Turn on the computer. If I replug them in, it's guaranteed to work. any other better ideas would be appreciated.

Sometimes, when it takes me too many times to restart in order for the computer to start up, it will end up loading up the BIOS right after restart. Thanks in advance! It's a Seagate Barracuda 7200.7, and the problem is, the BIOS doesn't see it, but when I boot from a system disk, be it Linux or Windows, then they both see This was a very easy task.

The next day I turn on the computer to find that it won't load into windows (the msg you get when they can't find your drive). Upon the reboot it is not doing anything eventhough floppy drive is in the boot sequence. In the window that comes up, click Disk Management in the left pane. And maybe try your method.

January 19, 2010 mIKE hey I have a really stupid problem I have a drive that doesnt show up in an alienware laptop. That is because it could be the cable itself, the connector on it, or some components inside the PSU that power up that particular cable/line. If so, remove it. Now do the same for the power supply connector at the drive that comes from the PSU.

You can revive this old PC, after all. But in Windows one of the two drives doesn't appear.