Home > Need Help > Need Help Desperately With My Laptops (2) And Linksys Wireless Router

Need Help Desperately With My Laptops (2) And Linksys Wireless Router

now i had another laptop... With the WAN port, no matter what I tried, I could not get the two routers to work on the same segment. AES & TKIP still no joy. now with that that try reconnecting and when prompted for passphrase or security key paste the generated key that you copied from step 6 above 13.

December 9, 2009 at 6:44 AM gv said... Enter the router settings page and check out the security configurations. The internet port is not used. Answers.

Just try the other router for a few weeks and see if you run into any issues...And just to clarify: the setup I have suggested is not a wireless bridge. If someone does larger downloads through the unprotected WLAN you may experience a slow connection for all your devices.3. I pressed the reset button and held it for 10 seconds and it connected fine when I entered the key again...

You... I used the weakish linksys (that's the router/ssid my landlady has) signal and boost it, THEN I create my own protected wifi. I am willing to spend upto a £100 and it will be used with 2 xbox 360 online... copy one of these generated keys. 7.

Yet none of them worked for me! Answer: This depends on which ISP you use, you may want to ask your ISP about a 'Home Networking' package. This time it gave me a different message. Wednesday, October 09, 2013 2:37 AM Reply | Quote 0 Sign in to vote I want to know how to fix the key pls man I forgot my key (Network Security

I managed to the problem fixed by calling D-link and working it through with them (they are still supporting the product for free, even though I bought it several months ago, I think the log is related to 802.1x but I am not sure right now. The IT guy at work had everything configured so that I could just hit the shortcut Icon to Remote Desktop Connection and enter an IP address and I was connected. Always use only one connection at a time, in particular during troubleshooting.

A cable! If I do use the two-lan solution is there any way to limit traffic on the open network to the type used by the radio?In any case I appreciate your thoughtful If you use the internet port on the second router you do not follow the suggested setup in this post. When I go to Wireless Network Connection Properties , click Internet Protocol (TCP/IP) then click Properties, I have the Obtain an IP address automatically radio button clicked as well as the

I messed around with a ton of other "helpful" hints on the web, but this is the first one that made everything work perfectly. http://magicnewspaper.com/need-help/need-help-desperately-hjt-logs-included.html On Tue, 21 Jun 2011 10:08:27 +0000, de Goldman wrote: > > >For those who are still struggling with this issue...this is how i got around it. enter your passphrase 5. Requesting a better router is a loooong shot haha.

See if this helps. Go to Start and then click on Control Panel. I just did the connection I told you about and it is working but... Some devices/drivers seem to stay connected to the same AP as long as possible until the connection cuts and then look for a new one.

thanks a bunch! It did take me a bit of time to figure it all out - butI learned a lot in the proces and will be available to help out friends who have I struggled with this for over 2 weeks, i read all manuals and googled everywhere but nothing was of help untill this morning...

I've seen many posts which suggest that Wireless web interface should be accessible through its IP, which - as I understand - would be at this case.

It connects wirelessly only, and it works much better with wireless security disabled. You should get a company which can do some measurements of the building. You cannot use the internet/WAN port on the second router.yes lan ports ... Wireless N requires not...

Under that page, remove all Preferred networks then click on the Add button. 4. save and apply and exit this window. 8. That doesn't work now that I have changed so many settings. 0 bobbyraw 16 9 Years Ago 1 are certain the PC at work is still on? 2 what settings did In my case, what happened is my D-link router suddenly couldn't find a network connection, so I phoned them and they had me change from WEP to WPA2, and delete and

Select copy network connection profile to computer IT WORKS. Click on "Use the following IP address" and enter the following: IP: SubNet Mask : Default Gateway : 4. AND TRY IT OUT ON YOUR LAPTOP! While such behavior would be expected for SSID (this length limit is stated here and there); I have found no indication that 32-char limit would apply to wifi password as well.

I copied this from the chat session with linksys: "1. I left it alone and went on to other stuff...because the board I was reading didn't give further info... from a LAN computer to a LAN computer. September 26, 2008 at 8:57 AM Judge said...

Are you able to connect to the router interface from a wired computer?Please set the computer back to obtain the IP address and DNS servers automatically, reboot the computer and You have two separate ethernet networks and thus two "broadcast" domains. After searching through several threads and not finding anything, I searched through my router to find my security settings. In default Gateway mode the second router does network address translation (NAT).