Home > Windows 2000 > Boot.ini File In Windows 2000 Pro

Boot.ini File In Windows 2000 Pro


In the past, when service packs were applied, many previously installed components had to be reinstalled. It is saved with Read-only, System, and Hidden attributes, requiring you to remove these attributes before reading or modifying the file. The bootcfg command enables additional Boot.ini file parameters to be added to existing or new entries. for her. http://magicnewspaper.com/windows-2000/win-2000-won-t-boot-system-file-missing-or-corrupt.html

We purposely deleted our BOOT.INI file under Windows XP SP2 to see what would happen, and the OS was still able to boot up; if that doesn't work for you, we'd The operating system performs the following steps: The function driver for the device determines that there is a new device on its bus. This unique hexadecimal number is either written to the MBR during the text-mode portion of Setup or by a previous installation of Windows NT 4.0 or earlier. The Multi syntax instructs Windows 2000 Professional to rely on the system BIOS to load system files. see here

What Is Boot.ini File

Setupldr is a variant of Ntldr, which initiates the installation process when it is called by the bootstrap loader and loads Ntbootdd.sys and Ntdetect.com. You can delete the following Windows 2000 Professional folders to free additional disk space: Program Files Documents and Settings Winnt Debug Note: The folder name for Winnt might vary. The first valid number for Z is 1; W, X, and Y start at 0.

  1. When Windows 2000 Professional is installed from a network share, the appropriate files from the service pack are installed without having to manually apply the service pack after the installation.
  2. by R.
  3. C is active andshows 30% usage, and D shows 40% usage.Go figure.Here's what I'm going to do.
  4. Disk Errors If you receive the error Not enough disk space for installation, use the Setup program to create a partition by using the existing free space on the hard disk
  5. Year 2000 Readiness Disclosure.

Updated: January 1, 2008 (2008.01.01); September 13, 2009 (2009.09.13). When the computer is started, the active partition that contains the boot sector code starts Ntldr, which loads and displays the boot loader screen from Boot.ini. How to Hide Boot.ini Entries from Displaying After Multiple Installations Microsoft Knowledge Base Article: 160899 You can hide additional installations of Windows NT from showing up in the boot menu, but Windows 2000 Boot Disk So, maybe you'll find a use for all those extra files you never asked for! [If you really want to get your old Windows 9x/Me partition back to its original state,

However, it's a hidden file, which is probably why you can't see it. Boot.ini Location Windows 7 File System Considerations Each operating system in a multiple-boot configuration can use one or more file systems to organize data on partitions. yes Checking if "/boot/grub/e2fs_stage1_5" exists... Setuplog.txt, which contains additional information about the device driver files that were copied during Setup.

Note: The log files that are created during Setup can be used to help troubleshoot any

If you were to look at your OS's Boot Sector in a disk editor, you'd find that your old MSWIN4.1 (Windows OSR2/98/98SE/Me) code had been replaced with a FAT32 version of Bcdedit At the end of each line, we take the phrase "Lba POs=" to mean: The LBA "Postition" (that is, the first sector of that partition) in LBA or Absolute sector notation; If it has not been disabled, your operating system might read and write to the hardware registers. In theory, the assigned resources can be rearranged at restart whether devices have been added or removed.

Boot.ini Location Windows 7

If no OS (old or new) boots up! The products referenced in this site are provided by parties other than LabMice.net. What Is Boot.ini File Ndetect failed.I just set it up here and got the same message.I was able to use an emergency WinME startup disk and go to DOS and checkthe C drive. Boot.ini Location Windows 10 For SCSI controllers, this number is typically between 0 and 7, or 0 and 15, depending on the adapter type.partition(0)The partition number.

Thanks - Haven't had the time to research Google.com - will check there also.I have a Pentium 4 with 38GB capicity. additional hints Well, it's actually a lot easier (and safer) to simply change the menu. The dependencies are described in the DependOnGroup and DependOnService entries in the subkey HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DriverName. Note: Windows 2000 startup is not considered complete until a user successfully logs on to the system. You can solve this problem by replacing the BIOS with a newer one that supports your hardware or by installing a device driver for the hardware. Ntldr Is Missing Windows 2000

What is a word for not seeing obvious "warning signs"? Ensure that the active partition is formatted as FAT16. In addition, I/O ports can be segregated according to bus type, with some I/O addresses reserved for PCI and others for ISA. anchor After a user logs on, the Clone control set is copied to the LastKnownGood control set.

Copies most installation files to the Windows 2000 installation folder to begin the GUI-mode phase of Setup. Msconfig we'd like to see both your BOOT.INI (copied directly from root folder into a .ZIP archive) and whatever kind of Bootsect file bootpart made from both without and with the LBA However, after boot sector 0 has been loaded into memory, the partition boot sector is dependent on both the operating system and the file system.

Configuring a Multiple-Boot System with MS-DOS

If you are going to set up Windows 2000 with a multiple-boot system that includes MS-DOS, itís a good idea to install MS-DOS before installing

One thing. To show hidden files in My Computer On the Tools menu, click Folder Options, and then click the View tab. The SCSI syntax is as follows: scsi(W)disk(X)rdisk(Y)partition(Z) Table 6.3 defines the parameters used in the SCSI syntax: Table 6.3 SCSI Syntax Parameters Parameter SCSI Parameter Definitions W The controller that is Grep in a huge log file (>14 GB) only the last x GB?

Sorry, no step by step. Went to control panel, system, advanced tab, starup and recovery, get a message C:\boot.ini file cannot be opened, click OK, and there is no option to edit - just 3 checked Booting from c:\winnt\. other This scenario also supports dynamic configuration, where a non-boot device, such as a PCMCIA card, is installed while the power is on.